PufferFish Practice Board Kit
If you are building a PufferFish ROV and you have very little or no experience soldering, we recommend that you start with a PufferFish Practice Board kit.
The kit includes:
A printed circuit board, 2 resistors, 2 bi-directional LEDs, 1 DPDT switch, a 9 volt battery holder, 2 wires to attach a motor or anything else that can handle 9 volts of bidirectional current.
Tools & equipment not included: Safety Glasses, 9 volt battery, soldering iron and solder, electrical tape, motor (optional), motor mount from the PufferFish Kit (to make a PCB holder- optional), wire strippers, wire cutters, scissors.
Download the PufferFish Practice Board Instructions. Check back periodically for updates.