Internship Blog - click on Title to read full Blog and see Photos
Click here to return to the Internship home page!
Week One- The Beginning
Author: Sebastian DiGeronimoHost Vessel: R/V Hugh R. Sharp
Hello all,
Over the past week I spent my time aboard the R/V Hugh R. Sharp, learning about the systems, running cable, and deployment and recovery of a HABCAM system and a dredge system. I spent my time learning under two gentlemen, a pervious MATE intern and current marine technician, Christian Kernsian, and another former MATE intern and current deckhand/marine technician, Huxley. I’ve bonded with the other intern Shaun Teter over our different experiences from his time being from California Maritime Academy and mine, at the University of South Florida St. Petersburg. We seem to have had similar awe in being chosen for such a huge internship both for the experience and our careers. I will breakdown the first week by showing the best and worst parts as of yet.
Arriving on Sunday, I spent my morning traveling to first the Philadelphia airport, where I met Shaun, then a connection to the Salisbury Airport in Maryland. The head of the marine technicians at the University of Delaware, Timothy Deering, met us at gate as soon as we arrived, which wasn’t hard as it was a single gate airport. We had quick chats about what we would be doing on board, the people we would be shadowing, and some life advice about Shaun and I’s next steps in our careers. As we traveled to the University of Delaware’s Marine Operations location, “you don’t have to know everything” really started ringing in my ears. Being that I don’t know specifically the type of work a marine technician does, reassurance that not being perfect is part of the job and learning how to adapt quickly may be just as important. When we arrived, Mr. Deering showed us the vessel from the deck, wet/dry labs, galley, 01 deck, bridge, below deck, auxiliary room and engine room. He quickly explained where our state room was and explained to us a quick overview of the ships systems that we would be responsible for, the Surface Monitoring System, cameras, CTD maintenance and any other task the science team needs as far as technology is concerned. Mr. Deering departed for a few hours leaving us with the “Dummies Guide to the R/V Hugh R. Sharp” which was a wealth of knowledge on procedures, instrument information, and general troubleshooting. After dinner, our day was officially over for an early morning tomorrow at 0645.
On Monday, Shaun and I met the crew at their early morning meeting. We finally met Christian and Huxley who would be our main mentors for the next 6 weeks. The first day was mostly preparing everything for when we ship on Wednesday. Our first order of business was Christian showing us to the systems that we will be working with, where to look for calibrations, how the Surface Monitoring System (SMS) works, where its located in the auxiliary room and how to flush it with freshwater when flow rates get too low or once every 24 hours. We then traveled to Mr. Deering’s office where our first problem was given to us, the intake for the SMS was having issues with bubbles getting in, so he suggested that the intake for the wet lab be switched with the intake for the SMS and have a backup pump to bypass if need be. After a couple of hose clamps were removed and switched, the SMS was ready for a test. We tested it by flushing it and then pumping in seawater.
Next, we were asked to run a VGA connection from the winch room to dry lab that was connected to the winch room camera, a quick an easy task for us interns. Christian, Shaun and I then learned how to terminate the VGA cable with a connector to get signal going. I’m understanding the necessity for learning and adapting.
Then we moved two fridges out of the dry lab to make room for more counter space for scientist. The third was left for tomorrow as it was much heavier and required more maneuverability. I’m quickly realizing that this career will be interesting and require much work.
The last major item to be addressed was the Knudsen (echosounder) was not transmitting data to the science team’s monitoring computer. The issue stemmed from a previous termination of a serial cable that ended up shorting the serial splitter which caused the computer to restart and not transmit any data. Mr. Deering had to step in to test each end of the connection to find the source of the problem with it being faulty wire connectors. Once, replaced with another splitter, all systems seemed to work better. A day well done!
For Tuesday, the splitter shorted again because of trying to secure the splitter, this time a quicker fix, but still took much time. We also finally removed the freezer and had to remove some items from the wall to make it fit on through. After that, most of the day was pretty tame. Not much was required as far as us interns. The science team was having issues with the fiber optics cable that ran to the HABCAM system, a system of taking consecutive images at depth while recording different environmental parameters such as salinity, depth, temperature, fluorescence, pitch, and roll. This was a bit beyond us so most of the day was spent with Shaun and I conversing over experiences at sea. His being very different as he was aboard training vessels and commercial vessel to learn to be maritime personnel where I spent most of my experiences as part of the science team. For dinner, we met the volunteers for the science team and had dinner at the local Irish pub, an exciting start to the week.
For Wednesday, we finally set sail! Unfortunately, we set sail later than expected, around 0830. Before leaving, we conducted static test on the fiber optic cable at 5000 lbs. for five minutes to make sure the connection would be stable. After leaving, Christian showed us the procedure for starting the logs for the SMS, then starting the flow from the intake and making sure all values being recorded were correct. Around this time, we talked about watch schedules with Huxley and I on the 0000-0600 and 1200-1800 and Christian and Shaun on the opposite until the next leg.
The first watch was Huxley and I, where the first HABCAM cast took place. It was test to make sure all systems were running. Huxley, Chuck (engineer) and I set the first cast. Huxley showed me what to do and how to coordinate with Chuck when lowering the HABCAM into the water. Once in, our job was done, and it was up to the science team to control it from there. A few minutes later, we picked it up using the winch and tugger cable. The recovery was performed better than when deploying it for the first time. Soon thereafter, we made another deployment this time for a full 36 hours. The rest of the time was Huxley showing me the system some more and different task that need to be performed every so often such as cleaning the filter to the pump when getting clogged. Our watch was over very quickly and another day over.
For Thursday, now is time for the reality of marine technician work, when everything is going as planned, there is not too much work us to do. Huxley and I did not have much to do in regard to science, but some housekeeping task were in order for our 0000 watch. We cleaned the bathrooms, took the trash to the bow storage and drilled out some broken plugs from the deck. Our watch was quick, but more was sure to come later, so I better count my blessings. On the second watch of the night, the only notable thing was I cleaned and flushed the SMS system by myself when the flow rate was below 45 mL/s.
For Friday, the most eventful day as of yet, starting at 1100 yesterday the 17th, lunch was in order with chicken parmesan sandwiches. Very shortly afterwards, the fun began. We were finally in the midst of scallop dredge instead of the HABCAM. First, Huxley, Chuck and I retracted the HABCAM to the port side deck as always. We had the main winch drag it to the surface and the smaller winch pull it aboard. Once it was secure, we tied of the cable to the HABCAM and were ready to start getting the dredge together. A few steps were taken to get it ready. On the previous watch, I watched a POV video of Christian getting the dredge back on board from last year, which helped me figure out what to do for this dredge. First, unsecured the rolled-up metal bag from the from metal beam. This unrolled the bag to place down the ramp. Next, we secured the dredge to the winch. We had to find a shackle that fit around the ring which took a few attempts and a little hammering. Then I had to clip the metal cable on the port side winch block to the winch attached to the table and clip the other end to the metal chain on the back end of the dredge where the bag ends to unroll it. We secured the front of the dredge to a lock chain, so it didn’t move during this process. Once unrolled, we ran the cable back through the port side winch block, unclipped it from the table winch, and had the dredge raised by the center winch. Chuck let it down into the water and the first dredge was started.
There was a miscommunication with the science team about letting the dredge into the water, a misfire of sorts being that they didn’t know we started it so their timing was off. We figured we would have to cast again once it came aboard. Now comes the fun part, as the dredge came up, Huxley and I attached two hooks to either side of the dredge and pulled it aboard using the table winch. From there we locked it in place and disconnected the dredge from the table winch. I grabbed the cable attached to the bungee on the port side winch block, then fed it to the other side where we connected it to the back side of the dredge. Raising it up it was clear that the rope bag on the inside was dislodged from the metal mesh making it difficult to empty the bag. After man attempts at dumping the bag with racks and shovels, we decided as is was good enough for the science team to sort out the pile. The dredge was pulled back onto the ramp and tied off. Huxley and I started shoveling the pile of sand dollars, star fish, fish, scallops and other marine life to the edge of the table to allow the sorting to take place. Once the table was clear, we pulled up the dredge again to finish dumping it onto the table. We repeated the process as before, but this time the bag was empty. Another sorting effort and we were able to start figuring out a solution to the bag problem.
The first idea was to lift the metal bag on itself to possibly move the rope bag into place and secure it, but the capabilities made it difficult to get enough reach. The final solution was the get the crane and move the bag to the deck for manual reconnection. A couple of tag lines were attached, and the crane picked it up gently. We place it on the starboard side and ratcheted it down. Then the crane was used to grab the center of the metal mesh to allow movement of the rope bag. Pete (Scientist), Huxley and I started attaching the bag to the mesh with metal wire on all sides, then lifted to the table to get the underside of the bag as well. Shortly after, with three hours in, we sent another dredge out, this time much smoother. The pull up was the same, with Huxley and I hooking the dredge and pulling it up with table winch, then getting the cable on the port side winch block to hook the metal back, thus emptying the bag fully on the first try. We shovel the results to the edge of the table for sorting. As the science team was doing their procedures, out watch was over with a HABCAM pull, two dredges, and a fixed bag. Dinner was a delicious feast of ribs, mac and cheese and salad.
As for the next watch at 2300, it started with Christian having issues with the CTD files not running in a batch scripting process properly. Errors with fluorescence and oxygen sensors were unfortunately occurring. No data seemed to have been recorded on these sensors. I tried looking at the scripts to see where possible errors were, but I couldn’t seem to find the source. I found in the Dummies Guide a manual way of getting the CTD files processed. After processing with unit conversion, wild edit, and serial plot, I may have found the issues. I looked at the **.cnv file which showed all the data points and the three sensors had corrupted data. For the fluorescence, it was reading -73, I suppose is its NaN and for oxygen large values, which again might be its NaN. I also tried files from a previous cruise with varied results, but it seems as though the cast did not record for those sensors. Since Christian was asleep at this point, I put a pin in it until he woke up. From there, not much occurred. I mostly talked with the science team about various subjects. We talked about fish species and graduate school while they were working the HABCAM (it was back in the water while asleep). Time passed relatively quickly with breakfast ending the day, sausage, bacon, eggs, toast, and French toast, my favorite. Another bedtime for me.
Friday, another afternoon watch mostly uneventful. All systems seemed to have been running smoothly so again not much to do for the next six hours. I ended up helping Huxley do a bit of painting on the sorting table as it is very rusted from years of use. I talked more with science team about various subjects, but not much work was needed to be done.
When I get to port, I will upload a few images.
Best,
-Sebastian D. 5/18/19 EDT 1937
Huxley and I pulling the HABCAM on 5/19/2019
The Marine Technicians Command Center
Post Comment
Blog Archives
December 2022
Week 8: Final Week aboard the Armstrong! - 12/16/2022Week 7: INSURV - 12/10/2022
Week 6: Inspections, 3D prints and CTD Terminations! - 12/03/2022
November 2022
Week 5: End of OOI and Happy Thanksgiving! - 11/27/2022Week 4: Finishing OOI Leg 1, Jumping straight into Leg 2! - 11/18/2022
Week 3: Leg 1 of the Final Coastal Pioneer Array OOI Cruise - 11/11/2022
Week 2: Terminations Terminations Terminations! - 11/04/2022
October 2022
Week 1: CTD lanyards, Linux, Mario Kart, Oh Yea! - 10/28/2022Pre- Internship stop in Iceland - 10/21/2022
Pre-Internship Introduction - 10/14/2022
September 2022
Walton Smith Week 16: Finishing running cable, closing the RoxBox, replacing sensors, and .322 terminations - 09/05/2022Week 15: Beginnings and Ends, Establishing a Network - 09/01/2022
August 2022
Walton Smith Week 15: Running cables, creating terminations, replacing sensors, and learning lots more! - 08/29/2022Week 14: In the Tween Deck, Wires, Terminations, Deconstructing and Reassembling CTD - 08/27/2022
Walton Smith Week 14: Final Engine install and dressing as well as side quests - 08/22/2022
Week 13: Getting the starboard engine onboard and mounted - 08/21/2022
Walton Smith Week 13: Cleaning bilges, mounting the port engine, and dressing it - 08/15/2022
Week 12: Bilges, Engine Mounts, and Rox Box Struggles - 08/12/2022
Week 7 - Syenna Graham - 08/11/2022
Walton Smith Week 12: Cleaning bilges and placing the engine onboard - 08/08/2022
Week 11: Forklifts, A-frames, Cranes, and a Big Ol' Engine - 08/06/2022
Week 6 - Syenna Graham - 08/04/2022
Walton Smith Week 11: Removal of the engine mounts and cleaning the bilge - 08/01/2022
July 2022
Week 10: Cleaning Bilges, Mounting Wifi, Running Cable - 07/29/2022Week 5 - Syenna Graham - 07/28/2022
Walton Smith Week 10: Removal of the engines - 07/25/2022
Week 9: Successfully Removing Both Engines - 07/24/2022
Week 4 - Syenna Graham - 07/21/2022
Walton Smith Week 9: Disassembling the engine - 07/18/2022
Week 8: Deconstructing the Port Side Engine - 07/14/2022
Week 3 - Syenna Graham - 07/14/2022
Walton Smith Week 8: Starting the engine project and improving our Wi-Fi - 07/11/2022
Week 7: POSMV, Wifi, and Welding - 07/07/2022
Walton Smith Week 7: Diving into individual jobs and ending the week on a good note - 07/04/2022
Last week with WHOI-JASON team! - 07/01/2022
Week 2 - Syenna Graham - 07/01/2022
June 2022
Week 6: Taking on projects making an A/C unit and step, while deconstructing the CTD - 06/30/2022Walton Smith Week 6: Lots of Good Memories and and Learning More - 06/27/2022
5th Week with JASON - 06/24/2022
Week 5: Removing Erroneous Electronic Components, Replacing A/C Units, and Fighting Ants - 06/23/2022
R/V Sharp week 4 - 06/23/2022
Week 1 - Syenna Graham - 06/21/2022
Walton Smith Week 5: Lots of poop (human and rodent, as well as grey water) but finished off on a good note - 06/20/2022
Last week on the Escanaba Cruise - 06/16/2022
Week 4: Making connections to the Network and Plumbing Projects - 06/16/2022
Week 4 R/V Sharp - 06/15/2022
Introduction - Syenna Graham - 06/14/2022
Walton Smith Week 4: Completing many jobs for the Marine Tech, Chief Engineer, and Bos'n - 06/13/2022
3rd Week with JASON - 06/11/2022
Week 3: Learning Network Infrastructure, Data Acquisition, and Working on Small Projects - 06/09/2022
Walton Smith Week 3: Learning about networking and completing jobs around the ship - 06/06/2022
Week 3 R/V Sharp - 06/05/2022
2nd week with WHOI - 06/04/2022
Week 2: Prepping for engine overhaul F.G. Walton Smith - 06/02/2022
May 2022
WEEK 3: R/V Sharp - 05/31/2022Week 2 R/V Sharp - 05/30/2022
Walton Smith Week 2: Finishing the second cruise - 05/30/2022
First week with the JASON team - 05/27/2022
Week 1: First Trip with the F.G. Walton Smith - 05/26/2022
WEEK 2: R/V Sharp - 05/24/2022
Walton Smith Week 1: Arrival and first cruises - 05/23/2022
Preparing to venture out! - 05/20/2022
Week 1 R/V Sharp - 05/19/2022
Week 1 R/V Sharp - 05/19/2022
Pre-Cruise Introduction - 05/16/2022
Introduction - 05/12/2022
Introduction - 05/10/2022
Pre-Cruise Introduction - 05/05/2022
April 2022
Leg 2 of OOI Pioneer 18 and Internship Conclusion - 04/30/2022Excitement from Leg 1 of OOI Pioneer 18 - 04/19/2022
Week 2: Time in Port and Beginning of OOI Pioneer 18 - 04/11/2022
Week 1: First Cruise - 04/04/2022
March 2022
Pre-internship: Introduction - 03/22/2022February 2022
Week 7: The End - 02/26/2022Working on the RV Sikuliaq - some pics - 02/17/2022
Week 6: Setting Sail - 02/15/2022
Week 5: Finally Floating - 02/09/2022
Week 4: Drydock part two: Electric Boogaloo - 02/02/2022
January 2022
Week 3: Drydock part one - 01/24/2022Week 2: Stormy Seas - 01/14/2022
First Week(kind of): Alaska - 01/05/2022
December 2021
Pre-Internship Intro Blog - 12/29/2021September 2021
Weeks 10 and 11 - 09/17/2021Week 9: Loading Alvin - 09/08/2021
Week 8 - 09/01/2021
August 2021
Day 38 - 08/19/2021Week 5 with Alvin - 08/11/2021
Week 5: Arrival - 08/11/2021
Week 6 - 08/11/2021
Day 28 - 08/09/2021
Week 4: To and Through the Panama Canal - 08/06/2021
Day 23 - 08/04/2021
Week 4 with the Alvin team - 08/03/2021
3rd Week at Sea (In Route to Panama) - 08/02/2021
Week 3: A Sweaty Set Up - 08/01/2021
July 2021
Weeks 2 and 3: Electrical Testing - 07/30/2021Day 18 - 07/30/2021
2nd Week at Sea (Anacortes, WA to SF, CA) - 07/26/2021
Week 2: Methane Seeps! - 07/25/2021
Day 12 - 07/24/2021
1st Week at Sea - 07/18/2021
Day 5 - 07/17/2021
Week 1 of My Internship - 07/14/2021
Week 1: Predeparture - 07/12/2021
Introduction - 07/11/2021
Getting Ready to Fly Out - 07/05/2021
Sailing off on a New Horizon - 07/01/2021
December 2020
Week 35 & 36: On The Walton Smith - 12/11/2020Week 45: Wrapping things up - 12/11/2020
Week 44: Soldering Penetrators - 12/04/2020
November 2020
Week 43: Cleaning and Holidays - 11/27/2020Week 42: Video Killed the Video Hub? - 11/20/2020
Week 41: Messy Work - 11/13/2020
Week 40: In the Ring - 11/06/2020
Week 34: On The Walton Smith - 11/02/2020
October 2020
Week 39: Some of the Pieces Come Together - 10/30/2020Week 38: Verification and Inventory - 10/23/2020
Week 37: More Moving and Wires - 10/16/2020
Week 33: On The Walton Smith - 10/12/2020
Week 36: Circuit Board Soldering - 10/09/2020
Week 32: On The Walton Smith - 10/05/2020
Week 35: Soldering work - 10/02/2020
September 2020
Week 31: On The Walton Smith - 09/28/2020Week 34: Headphones and Loud Noises - 09/25/2020
Week 30: On The Walton Smith - 09/21/2020
Week 33: Circuits! - 09/18/2020
Week 29: On The Walton Smith - 09/14/2020
Week 32: Running in Circles with Motor Controllers - 09/11/2020
Week 28: On The Walton Smith - 09/09/2020
Week 31: Simulating Alvin - 09/04/2020
Week 27: On The Walton Smith - 09/02/2020
August 2020
Week 30: Under Pressure - 08/28/2020Week 26: On The Walton Smith - 08/24/2020
Week 29: Soldering in Circles - 08/21/2020
Week 25: On The Walton Smith - 08/18/2020
Week 28: Smaller Disassembly - 08/14/2020
Week 27: Fail to Pass - 08/07/2020
Week 24: On The Walton Smith - 08/07/2020
Week 23: On The Walton Smith - 08/06/2020
Week 22: On The Walton Smith - 08/05/2020
July 2020
Week 26: Real Work with Real Problems - 07/31/2020Week 25: Start and Stop - 07/24/2020
Week 24: Fuses and Writing - 07/17/2020
Week 21: On The Walton Smith - 07/14/2020
Week 20: On the Walton Smith - 07/13/2020
Week 23:Keep on Working - 07/10/2020
Week 22: Starting Maintenance Projects - 07/03/2020
Week 18-19: On the Walton Smith - 07/03/2020
June 2020
Week 21: Preparing the Shop - 06/26/2020Week 20: Life without Alvin - 06/19/2020
Week 17: On the Walton Smith - 06/16/2020
Week 16: On the Walton Smith - 06/12/2020
Week 19: Alvin? What Alvin? - 06/12/2020
Week 18: Very Little Sub Left - 06/05/2020
Week 15: On the Walton Smith - 06/03/2020
May 2020
Week 17: Continued Alvin Deconstruction - 05/29/2020Week 14: On the Walton Smith - 05/27/2020
Week 16: Barely There Alvin - 05/22/2020
Week 13: On the Walton Smith - 05/20/2020
Week 15: Alvin Insides - 05/16/2020
Week 12: On the walton smith - 05/13/2020
Week 14: Return to Work - 05/09/2020
Week 11: On the walton smith - 05/06/2020
Week 13: Read On - 05/03/2020
April 2020
Week 10: On the walton smith - 04/29/2020Week 12: The Reading Continues - 04/26/2020
Week 9: On the walton smith - 04/22/2020
Week 11: More Reading - 04/19/2020
Week 8: On the walton smith - 04/14/2020
Week 10: Continued At Home Reading - 04/12/2020
Week 7: Saying Goodbye - 04/10/2020
Weeks 6 & 7: On The Walton Smith - 04/07/2020
Week 9: At Home Research - 04/05/2020
March 2020
Week 6: Heading Home - 03/30/2020Week 8: On Ship, Off Ship - 03/29/2020
Week 7: The Alvin Has Landed - 03/22/2020
Week 5: Changing out an Antenna - 03/22/2020
Week 5: Thinking Mud, Part II - 03/21/2020
Week 4: On the Walton smith - 03/16/2020
Week 6: Finishing Up At Sea - 03/15/2020
Week 2: Constant Change - 03/14/2020
Week 3: Preparing For Haul Out - 03/11/2020
Week 2: First time out - 03/10/2020
Weeks 3&4: Thinking Mud - 03/10/2020
Week 5: Smooth Seas Do Not Make Skillful Sailors - 03/08/2020
Week 1: Welcome to Bermuda - 03/07/2020
Week 4: Work, Work, Work - 03/01/2020
February 2020
Week 2: Barbados - 02/26/2020Week 1: Arrived at the Walton Smith - 02/24/2020
Week 3: Out and Back Again - 02/23/2020
Pre Cruise Introduction - 02/19/2020
Week 1: Aboard the Endeavor and off to Barbados - 02/17/2020
Week 2: Finally Underway - 02/16/2020
Pre-Cruise Introduction - 02/10/2020
Week 1: On board (kinda) - 02/09/2020
Pre-Cruise Introduction - 02/03/2020
Pre-Cruise Introduction - 02/01/2020
November 2019
Week 10: Homeward Bound - 11/02/2019October 2019
Week 8: Conte Cruise - 10/31/2019Week 9: Gulf of Alaska - 10/26/2019
Week 7: Second BATS Cruise - 10/24/2019
Week 8: Port Call - 10/19/2019
Week 6: Wilhelm Cruise - 10/17/2019
Week 7: Sea Gliders - 10/12/2019
Week 5: Return to Bermuda - 10/10/2019
Week 6: Marginal Ice Zone - 10/05/2019
Week 4: BATSVAL Cruise and Puerto Rico - 10/03/2019
September 2019
Week 5: Back to Beaufort Sea - 09/28/2019Week 3: Port Days - 09/26/2019
Week 4: Ice Station - 09/20/2019
Week 2: Humberto - 09/19/2019
Week 3: Sea Ice - 09/13/2019
Week 1: First Cruise - 09/12/2019
Week 2: Bering Sea - 09/07/2019
Week 16 - 09/05/2019
Test Blog - Preparation and Arrival - 09/04/2019
End of Internship - 09/04/2019
Last Cruise aboard the RV Atlantic Explorer - 09/01/2019
August 2019
Week 1: Dutch Harbor - 08/31/2019So Long Reykjanes Ridge - 08/30/2019
FINAL WEEK on Healy- no longer an Iceworm - 08/26/2019
Last Multiple Day Cruise - 08/25/2019
Week 14 - 08/24/2019
Week 4 on Healy - Near the end of HLY1901 - 08/19/2019
Week 4 On the Healy - 08/19/2019
Second to Last Cruise - 08/18/2019
Week 11 - 08/13/2019
Week 3 on Healy - HLY1901 - 08/12/2019
Roughest weather since I've been in Bermuda - 08/11/2019
Week 3 on the Healy-First week of science - 08/11/2019
Week 2 on Healy - Kodiak to Nome and Science - 08/06/2019
Holiday in Bermuda - 08/04/2019
Week 2 on Healy - 08/04/2019
July 2019
Week 10 - 07/31/2019First Blog Post - 07/30/2019
Week 1 on Healy - Seattle to Kodiak - 07/29/2019
Week 1 Healy - 07/29/2019
NSF Inspection - 07/28/2019
Modern life at sea - 07/24/2019
Sweet somber sailing - 07/22/2019
Bermuda Atlantic Time Series Study - 07/21/2019
Learning From Different Perspectives - 07/21/2019
Introduction - 07/20/2019
Birthday on Board - 07/16/2019
Pre-Internship Introduction - 07/16/2019
XBT gonna give it to ya - 07/15/2019
Week 9 - 07/15/2019
Always Saying Yes to Learning Experiences - 07/14/2019
First Week in Bermuda - 07/14/2019
The speed of sound - 07/11/2019
Week 2, What to Do - 07/08/2019
Week 2 - Ping it on - 07/08/2019
Reality on a research vessel - 07/04/2019
The Midnight Sun Has Set on Week 1 - 07/02/2019
Week 1 in the N. Atlantic - 07/01/2019
June 2019
Orienting ourselves on an ocean mapping cruise - 06/24/2019Week Six: The Final Week on the R/V Hugh R. Sharp - 06/24/2019
Pre-Cruise: Preparing for a Month Under the Icelandic Midnight Sun - 06/23/2019
Don't mind if I do... - 06/21/2019
Week 7 - 06/19/2019
Week Five: The Last Week of the Scallop Survey - 06/15/2019
Week 5 - This is how the survey ends - 06/15/2019
Week Four: Lost in the Abyss - 06/08/2019
Week 5 - 06/05/2019
Week Three: Eat. Sleep. Dredge. Repeat - 06/01/2019
May 2019
Week 4 - 05/29/2019Week 2 - Scallop Survey Shuffle - 05/28/2019
Week Two: Endless HABCAM - 05/25/2019
Week 3 - 05/22/2019
Week One- The Beginning - 05/18/2019
Happy HABCAM'ing - 05/18/2019
Week 2 - 05/15/2019
Pre-Intern - 05/11/2019
Pre-cruise test - 05/10/2019
Week 1 - 05/08/2019
November 2018
Week 5: All Good Things Must Come to an End - 11/23/2018Week 4: As the Sun Sets, Winter Awakes. - 11/16/2018
Week 3: Pancakes, Polynyas, and Polar Bears - 11/09/2018
Week 2: Shoot for the STARcS - 11/02/2018
7. Time to Say Goodbye - 11/01/2018
October 2018
Week 1: Up up up and Underway - 10/26/20186. CLIO is on Board - 10/25/2018
Week Five: Inport Dutch Harbor - 10/20/2018
Week Four: Finishing Science Ops and Steaming Towards Dutch - 10/13/2018
Final Week: Full-Circle Reflection - 10/13/2018
5. Back in Bermuda - 10/12/2018
Preparing for an High Arctic Expedition - 10/11/2018
Week Three:80 degrees north - 10/06/2018
4. Arrival in Puerto Rico - 10/05/2018
September 2018
Week Two: The Start of the SODA Moorings. - 09/29/20183. En Route to Puerto Rico - 09/28/2018
Week Twenty-Two: Part of Something Big - 09/23/2018
Week One: Underway from Dutch Harbor and into the realm of the Arctic Circle - 09/22/2018
2. Arrival, but no boat - 09/22/2018
Week Twenty-One: Hello, Old Friend - 09/17/2018
1. Time for an Adventure - 09/14/2018
Pre-Internship Healy 1802 - 09/12/2018
5: The turn of the tide - 09/09/2018
Week Twenty: Last Days In Alaska - 09/09/2018
4 My Final Week with the Alvin Group Aboard the Atlantis - 09/05/2018
Week Nineteen: Aleutian Appreciation - 09/02/2018
August 2018
3 First Week at Sea with the Alvin Group - 08/29/2018Week 3: Ahhh-tlantis - 08/27/2018
4: Into the abyss - 08/26/2018
Week Eighteen: To-Do List - 08/26/2018
Week Seventeen: Staying Cool Under Pressure - 08/20/2018
3: Across the horizon - 08/20/2018
2 Preparation for the Atlantis/Alvin Cruise - 08/20/2018
Week 2: Leaving Land - 08/18/2018
Week 1- On board R/V Atlantis - 08/13/2018
1 Aboard the R/V Atlantis with the Alvin Group - 08/13/2018
2: New beginnings - 08/13/2018
Week Sixteen: Arctic Chill - 08/12/2018
Week Fifteen: Iceworm no Longer - 08/05/2018
1: From one boat to another - 08/05/2018
Anticipating Alvin - 08/03/2018
July 2018
Week Fourteen: Cruising to Kodiak - 07/30/2018Week Thirteen: 47deg N at 85deg F - 07/23/2018
0 Pre-Internship Post: R/V Atlantis - 07/23/2018
Challenging Myself - 07/17/2018
Week 2-aka Last Week at BIOS - 07/15/2018
Week 1-Into the Bermuda Triangle - 07/08/2018
Week Twelve: Troubleshooting - 07/08/2018
Week 1-Into the Bermuda Triangle! - 07/08/2018
Week Eleven: Spruce and Sea Spray - 07/02/2018
June 2018
Pre-Internship Blog Post - 06/29/2018There and Back Again - 06/25/2018
Week Ten: The Quick Turnaround - 06/24/2018
R/V Atlantic Explorer Week 2 - 06/22/2018
Stateside - 06/21/2018
Week Nine: Science and Salvage - 06/17/2018
All Hands On Deck - 06/14/2018
The HABCAM Returns - 06/12/2018
Week Eight: Night Fishing - 06/11/2018
Smooth Seas and Proper Preparation - 06/04/2018
Week Seven: Dirt Don't Hurt - 06/03/2018
May 2018
Higher Latitudes, Lower Temperatures - 05/30/2018Ready to Depart! - 05/29/2018
Week Six: At the Dock - 05/28/2018
Wait it's only been a week? - 05/22/2018
Week Five: Hit Ground and Run - 05/20/2018
Week Four: Countdown to Reykjavik - 05/14/2018
Ready to Depart - 05/13/2018
Week Three: Transit to Iceland - 05/06/2018
April 2018
Week Two: A Return to the Day Shift - 04/29/2018Week One: Rough Seas - 04/22/2018
Arrival - 04/14/2018
November 2017
USCGC Healy - Final Week - 11/19/2017USCGC Healy - Slide into Seward - 11/12/2017
USCGC Healy - Happy Healy-ween! - 11/05/2017
October 2017
USCGC Healy - Science and Seinfeld - 10/29/2017USCGC Healy - Getting Started - 10/22/2017
Saying Goodbye - 10/13/2017
I'm going to name my dog, Niskin! - 10/10/2017
USCGC Healy - Internship Starting Next Week! - 10/08/2017
Don't tell the bears, I'm stuck! - 10/02/2017
Leaving for Puerto Rico- Did I mention Hurricane Maria JUST passed? - 10/01/2017
September 2017
Nature's Discotech - 09/25/2017Cruisin' to the Big City - 09/24/2017
Everyone's grows up sometimes: Holding my own shift - 09/17/2017
Preparing to go meet USCGC Healy - 09/16/2017
Week 3 Aboard the USCGC Healy - 09/12/2017
Storms, Cruise Prep and my First Milli-Q Installation - 09/10/2017
Week 2 Aboard the USCGC Healy - 09/05/2017
Week 5.286 Aboard the Armstrong - 09/04/2017
I've been suspended from a crane! - 09/03/2017
Week 4: Adieu Atlantis - 09/02/2017
Week 5 Aboard the Armstrong - 09/01/2017
August 2017
Week 1 Aboard the USCGC Healy - 08/29/2017Surprise Mooring Cruise - 08/27/2017
Pictures Galore! - 08/25/2017
Week 4 Aboard the Armstrong - 08/25/2017
BATS: Round Two! - 08/20/2017
Week 3 Aboard the Armstrong - 08/18/2017
Pre-Internship USCGC Healy - 08/17/2017
A Welcome Return from Canada - 08/13/2017
Week 3 Aboard the Walton Smith: Everglades, waterways, and CTDs - 08/12/2017
Week 2 Aboard the Armstrong - 08/11/2017
From Bermuda to Halifax, Canada - 08/06/2017
Week 1 Aboard the Armstrong - 08/04/2017
July 2017
Week 2 Aboard the Walton Smith: Tucker Trawls, Shrimp, and Bioluminescence - 07/30/2017On shore in Bermuda - 07/28/2017
Week 1 Aboard the Walton Smith: Knots, Navigation, and CTDs - 07/23/2017
A Welcoming Arrival and First Cruise in Bermuda - 07/21/2017
Before I Set Sail - 07/18/2017
Week 4 on the F. G. Walton Smith - 07/17/2017
Before the internship aboard the F.G Walton Smith - 07/16/2017
Home and an Awaiting Adventure in Bermuda - 07/14/2017
Week 3 on the F. G. Walton Smith - 07/09/2017
Week 2 on the F. G. Walton Smith - 07/03/2017
June 2017
Reflections and my Final Trip on the Pelican - 06/30/2017Week 1 on the F. G. Walton Smith - 06/25/2017
Final Two Weeks: Hurricane Season - 06/22/2017
Week Five: We're on the move - 06/20/2017
Week Five on the R/V Sharp - 06/17/2017
A New Vessel in Mississippi - 06/15/2017
Week 4 -the beginning of the engineering cruse- - 06/14/2017
Florida on the R/V F. G. Walton Smith - 06/11/2017
Week Four on the R/V Sharp - 06/09/2017
Pictures from Scallop Leg 2 - 06/06/2017
Week three is a Little late - 06/06/2017
Beautiful Deep Sea Discoveries- Photos Galor, A MUST Read! - 06/06/2017
Week Three on R/V Sharp - 06/02/2017
May 2017
Deep Water Horizon, Shipwrecks and ROVS - 05/29/2017Its week two on board the Atlantis - 05/28/2017
Week 2 on R/V Sharp - 05/27/2017
Pictures from Scallop Leg 1 - 05/25/2017
First week with the R/V Atlantis - 05/23/2017
Big Wigs and Boat Celebrations in Baton Rouge - 05/22/2017
Week 1 on R/V Sharp - 05/19/2017
Preparation for Internship aboard R/V Atlantis - 05/15/2017
Docks and Landers in the Gulf - 05/15/2017
Getting Ready for my Internship on R/V Hugh R. Sharp - 05/10/2017
First Month Down - 05/08/2017
Mexico, Storms and Drones - 05/01/2017
April 2017
Week Two: The Sound of Pelicans and the Smell of New Orleans! - 04/22/2017Week 1: The Gulf of Mexico and Dolphins! - 04/13/2017
Almost on my Way! - 04/01/2017
October 2016
Conclusions on the R/V Sikuliaq - 10/12/2016September 2016
Sheets and Ice Sheets: Taking the Plunge - 09/16/2016Blog 6: Day 28 - The End in Sight - 09/11/2016
WEEK 9- Breakdown, Bottles and Bees - 09/10/2016
Blog 5: Day 26 - Pictures! - 09/09/2016
CTDs, Sea Ice and Polar Bears - 09/08/2016
Blog 4: Day 22 - White September - 09/05/2016
WEEK 8- Cable Termination, Nearing the End - 09/03/2016
August 2016
Transiting on the R/V Sikuliaq! - 08/30/2016Blog 3: Day 14 - Waiting out the ice - 08/28/2016
WEEK 7- An Unexpected Visit Home - 08/27/2016
Blog 2: Day 7 - I think I see Russia - 08/21/2016
WEEK 6- Alongside - 08/20/2016
Blog 1: Day 0 - Pre-internship post - 08/14/2016
Better late than never - 08/14/2016
WEEK 5- Canceled Cruises, Funeral For Our Fallen Brother - 08/13/2016
Return and Reflect - 08/10/2016
Week 4- Downtime and Tragedy - 08/08/2016
Week 3- South Florida Ecosystem Restoration Cruise - 08/03/2016
Moorings and Transit - 08/03/2016
July 2016
Creatures of the Pockmarks - 07/26/2016Pre-Internship on the R/V Sikuliaq! - 07/25/2016
Week 2-Bioluminescent Sea Creatures - 07/24/2016
Station to Station - 07/20/2016
Week 1 - 07/17/2016
Another successful cruise - 07/17/2016
Backing and Ramming - 07/11/2016
Pre-Internship Blog - 07/07/2016
R/V Sikuliaq Cruise Report - 07/07/2016
Holiday at Sea- Week 1 - 07/04/2016
Quiet times - 07/02/2016
Blog 3, Final - 07/01/2016
June 2016
Introduction and Anticipation - 06/27/2016Pre-Internship Blog Test - 06/26/2016
USCG Healy Internship - Post 2 - 06/24/2016
Week 5 Aboard the R/V Sharp - 06/20/2016
Pre-internship blog - 06/19/2016
BATS Cruise - 06/16/2016
Week 4 Aboard the R/V sharp - 06/14/2016
Back at it - 06/14/2016
Pre-Internship - Post 1 - 06/13/2016
Week 3 Aboard the R/V Sharp - 06/09/2016
Hydrostation Time! - 06/09/2016
The End or the Beginning? - 06/09/2016
A Quick Update - 06/04/2016
Week Three - Back at the Dock - 06/02/2016
Week 2 Aboard the R/V Sharp - 06/02/2016
A Slight Change of Plans - 06/01/2016
May 2016
Week 01 - 05/28/2016Week Two- Change of Plans - 05/26/2016
Week 1 - 05/22/2016
Pre-Internship - 05/22/2016
Land! - 05/20/2016
Week One in the Bermuda Triangle - 05/19/2016
Moving into sediment - 05/14/2016
Pre-Internship - 05/10/2016
Pre-Intern - 05/10/2016
Mapping Complete - 05/06/2016
Seafloor mapping out in the Pacific - 05/03/2016
April 2016
Transit - 04/17/2016Back at sea - 04/09/2016
Picture test - 04/09/2016
Stuck - 04/07/2016
March 2016
Busy busy busy - 03/26/2016Week 1 - 03/13/2016
Pre-internship - 03/02/2016
September 2015
The last few days on R/V Langseth - 09/12/2015Looking for freshwater - 09/06/2015
Week One: The Langseth is hard at work - 09/06/2015
August 2015
Week 4- The journey back - 08/28/2015Getting ready for the Langseth! - 08/25/2015
Week 3- Home stretch - 08/21/2015
The End - 08/19/2015
Week 2- Equipment - 08/15/2015
Multibeam/Coring Cruise - 08/13/2015
Week One- Getting acquainted - 08/07/2015
July 2015
Let The Science Begin - 07/31/2015I didn't blow up the ship! - 07/30/2015
My third and longest trip - 07/27/2015
New England Mud Patch - 07/23/2015
First 12 days on the Point Sur - 07/17/2015
Week 2 - From Port to the Deep Blue - 07/15/2015
Back to Corvallis - 07/14/2015
Searching for Deep Sea Prey - 07/09/2015
RV Langseth: Last blog post - 07/08/2015
Dreams do come true - 07/05/2015
First day aboard the RV Falkor - 07/05/2015
RV Langseth: Wrapping up Coverage - 07/03/2015
First Week at Sea - 07/02/2015
June 2015
End of a Chapter - 06/25/2015RV Langseth: Fishing gear - 06/24/2015
R/V Pelican- The End - 06/21/2015
After the Healy - 06/20/2015
Days of Dredging - 06/18/2015
RV Langseth: Mowin' the grass - 06/17/2015
R/V Pelican: Waiting on the Weather - 06/13/2015
Dredging, Whales, and the Last Leg - 06/11/2015
RV Langseth: Data Rolling in - 06/10/2015
RV Langseth: First week out at sea - 06/04/2015
Fun with Dredging - 06/04/2015
R/V Pelican- Almost there! - 06/04/2015
Quick update - 06/01/2015
May 2015
Transitions - 05/28/2015RV Langseth: First few days on the boat - 05/27/2015
Pre-Internship Hello - 05/22/2015
Week #1: Settling In - 05/21/2015
From parts to product - 05/20/2015
RV Langseth: Getting ready to go - 05/19/2015
Adios San Diego, Hola Portland! What we do while in transit … - 05/15/2015
Pre-Internship Excitement - 05/13/2015
Reflections - 05/08/2015
Best laid plans … - 05/01/2015
April 2015
Understanding Wire and Rope (Part 1) - Wire - 04/28/2015Oregon Coast Marine Life - 04/20/2015
Maintenance, Sampling and Catching (because anyone can fish) - 04/17/2015
Haze Gray (white) and Underway - 04/07/2015
Ocean Observatories Initiative Cruise - 04/03/2015
March 2015
3..2..1..Start - 03/24/2015La felia padrig (Happy St. Patty's Day) - 03/17/2015
October 2014
The End…for now - 10/13/2014September 2014
Cape Crusaders - 09/30/2014Our love/hate relationship with electronics - 09/25/2014
Looking Westward - 09/23/2014
Our favorite patch of ocean - 09/16/2014
Last Day - 09/12/2014
On my own - 09/11/2014
In all her glory - 09/09/2014
Irminger to Iceland - 09/02/2014
Let's do this! - 09/02/2014
August 2014
Apocalypse Now - 08/27/2014A picture is worth a thousand words - 08/27/2014
The R/V Oceanus marine tech team - 08/26/2014
Week Six- The End - 08/26/2014
Steaming west in the Labrador Sea - 08/25/2014
Hole in the hull - 08/21/2014
Week Five - 08/20/2014
R/V Knorr is in the Labrador Sea - 08/18/2014
Week Four - 08/15/2014
Castles in the sand - 08/15/2014
Last OBS cruise - 08/13/2014
2 down and another to go... - 08/11/2014
Working on the Irminger Sea - 08/10/2014
Reflections after the internship - 08/08/2014
Week Three- Not so many Thunderstorms - 08/06/2014
On the R/V Knorr - 08/05/2014
CTDs - 08/04/2014
Deploying OBSs - 08/03/2014
July 2014
Sea sickness under control - 07/31/2014Week Two- Good Bye Scallops, Hello Thunderstorms - 07/30/2014
The Final Post - 07/29/2014
Arrived to Dutch Harbor - 07/28/2014
Hi Seas Net: a frustrating mystery - 07/26/2014
5 days until Iceland - 07/26/2014
Observations and Ideas - 07/24/2014
Filtering Phytoplankton! - 07/23/2014
Internship begins - 07/22/2014
Week One-Scalloping - 07/21/2014
Adjusting - 07/18/2014
RVHRS Scallop Survey - Last Leg - 07/17/2014
On to the Healy and a Rescue in the Ice! - 07/15/2014
RVHRS Scallop Survey - Second Leg - 07/14/2014
First week onboard R/V Oceanus - 07/13/2014
Just finished preparing, ready to begin - 07/07/2014
Ready to Go - 07/07/2014
Every new beginning comes from some other beginning's end - 07/03/2014
June 2014
Third week on the Sharp - 06/30/2014RVHRS Scallop Survey - First Leg - 06/30/2014
Preparation for the Journey through Ice and Snow - 06/29/2014
IT WORKS!! - 06/27/2014
Second week on the Sharp - 06/16/2014
Preparations - 06/11/2014
Ocean Bottom Electromagnetic Receivers - 06/10/2014
First week aboard Sharp - 06/07/2014
Applying, packing, and travel - 06/06/2014
May 2014
Departing for My Internship! - 05/29/2014On Board the R/V Oceanus - 05/05/2014
April 2014
Manganese Mania - 04/30/2014End of my Thompson Hitch - 04/16/2014
No More MoorSPICE - 04/02/2014
March 2014
Solomon Seas with MoorSPICE - 03/19/2014Transit to New Caledonia - 03/05/2014
February 2014
End of the Wave Chasers Cruise - 02/19/2014Tow-Yo Troubles on the Thompson - 02/06/2014
January 2014
Gray Skies and Blue Marlin - 01/28/2014Let the Wave Chasing Commence! - 01/19/2014
Gearing up for 40 days with the WaveChasers - 01/13/2014
Samoa-Bound - 01/01/2014
November 2013
Special Thanks - 11/11/2013Some Science - 11/04/2013
1PPS and Dry Wells - 11/03/2013
October 2013
E/V Nautilus - 10/31/2013The Simple Things - 10/24/2013
Pictorial of the most epic rebuild - 10/14/2013
Team CTD - 10/13/2013
Back in the saddle again - 10/06/2013
Just the Beginning - 10/06/2013
September 2013
Time To Find Some Warm Socks - 09/28/2013It's the Final Countdown! - 09/11/2013
Icelandic Culinary Delights - 09/04/2013
Signing off E/V Nautilus: Michael Smith - 09/02/2013
Fun, Games, & a little bit of Science - 09/01/2013
Possibly more than you wanted to know about what we do - 09/01/2013
August 2013
From the Boston Tea Party to Tacos - 08/27/2013Getting More Dives Under My Belt - 08/26/2013
The Deep Blue - 08/20/2013
Settling in New New York - 08/19/2013
Multi-core-apalooza - 08/19/2013
My First Week at Sea - 08/16/2013
Signing off from the R/V Hugh R. Sharp - 08/16/2013
First Night Aboard RV Langseth - 08/14/2013
Welcome to Iceland - 08/12/2013
6 Months In - 08/11/2013
Incoming ROV Intern- Michael Smith - 08/08/2013
Checking in from the R/V Hugh R. Sharp - 08/02/2013
From Satellites to C-Nav - 08/01/2013
July 2013
Counting Down the Days - 07/22/2013R/V H.R. Sharp Fishing for Rocks - 07/17/2013
Trial by fire - 07/14/2013
R/V Marcus G. Langseth: Leaving the Boat - 07/10/2013
Watching Bubbles and dodging waves - 07/07/2013
R/V H.R. Sharp Georges Bank - 07/06/2013
R/V Marcus G. Langseth: Working in Port - 07/01/2013
June 2013
Hanging out in Davy Jones' livingroom - 06/28/2013R/V Marcus G. Langseth: BREAKing News - 06/25/2013
R/V H. Sharp: Scallop Photo Shoot and Shucking Party - 06/23/2013
Astoria Oregon... - 06/20/2013
R/V Marcus G. Langseth: A Daily Routine on the Boat - 06/19/2013
R/V BLUE HERON-Duluth Minn./ Lake Superior - 06/17/2013
R/V Marcus G. Langseth: Working out the Kinks - 06/13/2013
The Panama Canal and so much more - 06/12/2013
R/V H. SHARP1: From the West to East - 06/10/2013
R/V Marcus G. Langseth: Collecting the Data - 06/08/2013
Oh what amazing sights we see - 06/05/2013
R/V Marcus G. Langseth: Letting out the Streamers - 06/04/2013
May 2013
R/V Marcus G. Langseth: An Explanation of How Stuff Works - 05/31/2013Bouncing around THE BAR - 05/31/2013
Staring into the Depths - 05/29/2013
Hard Days of Work - 05/27/2013
Leaving Town with Lasers - 05/24/2013
Whirlwind of Travel - 05/23/2013
Tyler Poppenwimer: R/V Marcus G. Langseth - 05/23/2013
Ship and Shop Maintenance - 05/17/2013
Wires, wires everywhere! - 05/14/2013
R/V Barnes Day trips and More - 05/10/2013
New Langseth Adventures! - 05/09/2013
The Sounds of Silence - 05/05/2013
The Journey Continues - 05/01/2013
In port - 05/01/2013
April 2013
Internal Waves and Whales - 04/24/2013Langseth Part II: The Mid-Atlantic - 04/21/2013
Northwest Bound - 04/17/2013
Exciting news from the Langseth! - 04/15/2013
Things never go as planned - 04/10/2013
R/V Marcus Langseth: The 2013 MATE Adventures - 04/05/2013
March 2013
Unexpected knowledge comes in handy - 03/25/2013Don't bight off more than you can chew. - 03/24/2013
